Pads & Cushions
Heel Pad
A broad Myolite cushion within the frame's heel cup. Softens contact and redistributes selected heel pressure while preserving heel seating in the cup and shoe.
- 1.5 mm
- 3 mm
- 4.5 mm
- 6 mm
15 Shore A Myolite
A heel cushion softens the contact between the heel and the Root orthotic's supporting cup. It is a broad comfort and pressure-distribution option for a heel that needs a more compliant landing surface. The frame continues to provide the cup and support; the cushion changes the interface within it.
Myolite covers the upper heel cup beneath the top cover and ends just beyond the calcaneal tubercles. The material is greatest under the plantar heel, with its medial, lateral and posterior borders following the cup and blending into the surrounding surface. Heights are 1.5, 3, 4.5 and 6 mm. The cushion sits above the frame rather than beneath its rearfoot post.
The cushion deforms as the heel loads and can spread contact over more tissue. The cup helps retain that supporting shape. Added material also raises the unloaded heel within the cup, reducing available depth; the loaded height depends on compression. Pressure studies support reductions in selected heel loads, while clinical studies show that better pressure readings do not always produce superior pain or comfort outcomes [E49, E50].
Choose a heel cushion for diffuse heel contact sensitivity, selected fat-pad insufficiency or a softer interface within a plantar-heel-pain prescription. Central fat-pad pain, plantar-fascial pain, neural pain and bone stress are different presentations. The cushion is most directly suited to a contact-tolerance goal and can accompany diagnosis-specific rehabilitation and footwear management.
Too much cushion can lift the heel out of the cup or shoe counter and cause slippage. Foam that compresses fully may leave a hard focal contact despite feeling soft by hand. A painful prominence may need shaped relief rather than a uniform layer over it. Unexplained focal bone pain or an active lesion requires the corresponding assessment.
A 1.5 mm cushion mainly softens the interface with little added height. A 3 mm layer offers more deformation room. The 4.5 and 6 mm versions need enough cup and shoe depth to preserve heel seating. Choose the thickness that remains useful under load. Compressible cushioning is different from a prescribed heel lift, whose purpose is a controlled elevation.
A suitable heel-cup contour and a broad soft layer can complement the cushion. A heel-spur pad introduces a local lower-contact region and must retain that shape in the combined construction. A Carlton saddle shifts more contact into the midfoot. In a Richie Brace or gauntlet brace, heel elevation also changes alignment within the brace, so the complete fit is part of the cushion choice.
A heel-spur pad offers focal horseshoe relief. A soft heel plug replaces a local harder zone. A deeper cup changes containment. A full-length layer softens more of the plantar interface. A heel lift serves an elevation goal rather than a general cushioning goal.
Check central and marginal heel contact, cup seating and shoe slippage during walking. Track the relevant symptom, whether first-step pain, prolonged standing discomfort or contact sensitivity. At follow-up, inspect compression and the heel margins. New midfoot pressure or a heel that rides too high signals a change in the assembled fit.
A 1999 trial found improvement with several heel inserts used alongside stretching, and a 2006 orthosis trial found modest time-dependent functional benefits [E48, E47]. More recent heel-plug studies measured lower hindfoot pressure, with no clear added clinical advantage in the symptomatic crossover study [E49, E50]. These findings support cushioning as a useful tool with outcomes checked at the patient level.
-
Effects of contoured insoles with different materials on plantar pressure offloading in diabetic elderly during gait.
Twenty-two older adults with diabetes tried four contoured insole materials. Softer Poron and EVA designs generally offloaded more than the stiffer tested materials.
The tested material comparison supports attention to compliance. It does not show that the softest possible material or a specific Myolite layer is universally best.
-
Effectiveness of foot orthoses to treat plantar fasciitis: a randomized trial.
One hundred thirty-five patients with plantar fasciitis received sham, prefabricated or custom orthoses. Small functional benefits occurred at three months; primary outcomes did not differ significantly at 12 months.
The measured effects belong to the complete orthoses and follow-up intervals. A heel cushion, fascia groove or saddle was not isolated.
-
Comparison of custom and prefabricated orthoses in the initial treatment of proximal plantar fasciitis.
Two hundred thirty-six patients used stretching alone or stretching plus one of four inserts. At eight weeks, improvement was reported by 95% with silicone, 88% with rubber, 81% with felt and 68% with custom orthoses.
Every group used stretching. The tested inserts differ from the covered Myolite cushion and horseshoe shapes in this guide.
-
Custom-made foot orthoses with and without heel plugs and their effect on plantar pressures during treadmill walking.
Ten healthy adults tried otherwise-matched custom orthoses with or without a soft Poron heel plug. The plug reduced hindfoot pressure while increasing some midfoot pressures.
The plug is a related focal heel accommodation. Pressure transfer in healthy adults does not establish clinical symptom benefit.
-
Custom-made foot orthoses with and without heel plugs and their effect on treatment outcomes and plantar pressures in patients with plantar fasciitis: A crossover study.
Twenty-one patients with plantar fasciitis tried orthoses with and without heel plugs. Plugs reduced hindfoot pressure, but function and comfort did not differ between designs after the treatment periods.
Lower hindfoot pressure did not produce better function or comfort between designs. The paper was published online in 2025 and in a 2026 journal issue.
- Carlton Saddle
- HCP-MYO-15A--1p5 1.5mm Heel Cushions - 15 Shore A Myolite
- HCP-MYO-15A--3p0 3mm Heel Cushion - 15 Shore A Myolite
- HCP-MYO-15A-4p5 4.5mm Heel Cushion - 15 Shore A Myolite
- HCP-MYO-15A-6p0 6mm Heel Cushion - 15 Shore A Myolite