Pads & Cushions
Slot Accommodation
Open-ended relief corridor within the covered extension, beginning beneath a selected metatarsal head and continuing distally. Suits pressure sensitivity that follows a ray beyond one focal spot.
- 1.5 mm
- 3 mm
- 4.5 mm
- 6 mm
15 Shore A Myolite
A slot accommodation gives a painful ray a longer corridor of room. It begins beneath a selected metatarsal head and continues toward the end of the forefoot extension. Choose it when the sensitive region reaches beyond a single circular spot or when a distal punch rim would lie in the path of the affected tissue.
The slot is cut through the extension cushion. Its rounded proximal end follows the metatarsal-head region, and its parallel-sided channel continues distally to the end of the extension. A sulcus-length extension ends beneath the toe bases; a toe-length extension carries the channel farther beneath the toe. The continuous top and bottom covers enclose the channel and maintain a smooth finished surface.
The frame supports the more proximal foot while the cushion on either side of the slot carries the neighboring forefoot. The affected ray encounters less supporting material along its distal course. Compared with a punch, the slot removes the closed distal border. It also removes support over a larger area, which can change toe purchase, meaning the toe's ability to press against the supporting surface during stance and propulsion.
Choose a slot for a focal metatarsal-head lesion with a pressure-sensitive corridor extending toward its toe, or for a prominent head whose relief is better served by an open-ended channel. The therapeutic goal is comfortable accommodation throughout that corridor. A toe-tip lesion may need a crest or digital prop instead, because removing material beneath the ray does not necessarily reduce pressure at the tip.
A narrow channel can leave its edges against the painful tissue. An overly broad channel can take away useful support from adjacent toes or heads. Check for new instability, loss of toe purchase and edge pressure. Suspected plantar-plate injury, fracture or progressive deformity needs assessment of the underlying problem as well as local comfort.
Depth is the thickness of the extension cushion removed, commonly drawn from the 1.5, 3, 4.5 and 6 mm cushioning increments. Width follows the tissue corridor; length follows the extension. The key is clearance during loading, not the appearance of the empty device. If a margin remains tender, changing width or alignment is often more useful than making the surrounding cushion thicker.
A broad soft layer can improve tolerance around the channel. Proximal metatarsal support can help redistribute load farther behind the heads. A toe crest or a directional extension changes support in the same area, so the final contour must retain a coherent purpose: one component should not refill the space the other was intended to create.
A punch suits a confined head-level target. A balance pad builds a platform around a selected low-contact region. A toe crest shifts support toward the underside of the toes when the tip is the main pressure site. Broad cushioning suits diffuse sensitivity that does not follow one ray.
Assess the full length of the channel during walking, including the proximal curve, side margins and distal toe contact. Check both relief and stability. At follow-up, look for a new callus beside the slot, persistent target pain or a toe that has lost useful support. Pressure assessment can identify a receiving region that is becoming overloaded.
The slot applies the same load-transfer principle studied in local apertures and removable-plug insoles [E06, E10]. Metatarsal-padding research shows that location and the surrounding support determine whether pressure falls or rises [E03, E05]. These studies explain the contact strategy; the benefit of a particular slot is established through its fitted response.
-
Effect of metatarsal pad placement on plantar pressure in people with diabetes mellitus and peripheral neuropathy.
Twenty adults with diabetes, neuropathy and prior forefoot ulcers. Placement 6.1–10.6 mm proximal to the metatarsal-head line reduced peak pressure by an average 32% ± 16%. More distal placement could increase pressure.
The useful placement range belongs to this neuropathic-foot sample. Head location, lesion footprint and the assembled insole still guide individual fitting.
-
Effects of metatarsal domes on plantar pressures in older people with a history of forefoot pain.
Thirty-six older adults. Domes reduced distal forefoot pressure by approximately 45–60 kPa. Positioning 5 mm proximal to the heads gave the best balance of distal relief without increasing pressure where the pad sat.
This study directly supports the dome contact strategy in older adults. Its pressure findings do not establish long-term pain improvement or one position for every population.
-
The effect of removing plugs and adding arch support to foam based insoles on plantar pressures in people with diabetic peripheral neuropathy.
Twenty-six adults with diabetic neuropathy. Removing foam-insole plugs at the highest-pressure forefoot region reduced mean peak pressure by 32.3%; adding arch support produced further offloading.
Removing local material reduced pressure in a neuropathic population. The construct differs from a simple circular punch and does not alone establish active-ulcer healing.
-
Evaluation of orthotic insoles for people with diabetes who are at-risk of first ulceration.
Sixty adults with diabetes and neuropathy tried nine individualized insole designs. Metatarsal-bar position affected pressure relief, and generic design rules left more high-pressure sites than individualized selection.
The study supports individualized forefoot location and cushioning. Its measured pressure changes explain the design strategy rather than proving every bar configuration is equivalent.
-
Preliminary investigation on the reduction of plantar loading pressure with different insole materials (SRP--Slow Recovery Poron, P--Poron, PPF--Poron +Plastazote, firm and PPS--Poron+Plastazote, soft).
Five subjects tried several 6.4 mm material combinations and felt with a first-MTP aperture. The aperture reduced first-MTP peak pressure by 37%; firm Poron–Plastazote reduced it by 29%.
A very small pilot supports local material and aperture principles. Its numerical results belong to the tested felt and foam constructs.
-
The relationship of the position of the metatarsal heads and peak plantar pressure.
CT and pressure measurements showed that first-, fourth- and fifth-metatarsal-head positions did not coincide precisely with local peak pressure.
Anatomical location and the pressure-sensitive footprint are related but distinct. Accurate fitting can require both rather than a bony landmark alone.
-
Foot orthoses for forefoot pressure reduction and the hypothesized role in calf muscle stretching: A systematic review highlighting an evidence gap.
Twelve studies with 456 participants reported reduced forefoot peak pressure or pressure-time integral with tested orthoses. Metatarsal support and soft contoured designs showed useful pressure effects. No eligible study tested a design specifically intended to stretch the calf.
The review used a narrative synthesis because designs and populations differed. Its included primary studies retain their original evidence identity and do not independently validate each Root modification.
- Top Cover Length - To Metatarsals
- Morton's Extension - Standard (with 1st)
- SA-MYO-1M Slot Accommodation in Myolite 1st
- SA-MYO-2M Slot Accommodation in Myolite 2nd
- SA-MYO-3M Slot Accommodation in Myolite 3rd
- SA-MYO-4M Slot Accommodation in Myolite 4th
- SA-MYO-5M Slot Accommodation in Myolite 5th