Functional Changes Made by Orthotic Modifications | KRM Forum

Functional Changes Made by Orthotic Modifications


  •  

        The importance of this post is tremendous since it affects everything we do when prescribing orthotic devices and all of their accessories/modifications. Most of the modifications we use will have multiple functions as with a seemingly simple metatarsal pad. 

     

    Analyze the Functional Changes made by every part of an orthotic device

    What are the functional changes produced by a metatarsal pad?

    Support the Metatarsals

    Help to Center Weight through the foot

    Off Weighting the Metatarsal heads

    Taking Stress off the Intermetatarsal Nerves

    Slight Pronatory force Subtalar Joint and both Midtarsal Joints

    By firming up the Metatarsals, help with Active Propulsion

     

    Please see the beautiful renders of these metatarsal pads from KevinRoot Medical:
    https://www.kevinrootmedical.com/pages/clinic-guide-metatarsal-pad-2-4

     

         These effects can have both positive effect(s) and negative effect(s). So, with a centrally located metatarsal pad, if you want a strong propulsion then it should help, especially in pronated feet. If you want the weight to go entirely into the medial arch (lisfranc’s injury example), a metatarsal pad will take some pressure off the arch. I will discuss some of the common modifications made here at KevinRoot Medical in other posts, but though to get you thinking some now. 

     

    What would be possible positive(s) and possible negative effects of a 21 mm Heel Cup Rx? The standard heel cup is 14-16 mm high. As you increase the heel cup, you are creating a better stabilizing force on the heel (why UCBLs are even higher), but you run the risk of pushing the shoe heel counter away from the foot thus creating instability. 

     

     



Please login to reply to this topic!